Store information
Water Vapor Fireplace Installation Guide
Plan a built-in water vapor fireplace around the room, the finished opening and the access needed for everyday care. Confirm the model-specific drawing before your builder starts fabrication.
800 mm model reference dimensions
The dimensions below come from the supplied 800 mm product drawing. They apply to that reference model, not every custom length.
| Part | Reference dimension |
|---|---|
| Top flange | 800 length × 250 depth |
| Body | 750 length × 215 depth × 200 height |
| Clear opening | 770 length × 230 depth |
| Internal recess depth | At least 220 |
The overall flange covers the opening; do not use the flange size as the cutout size. Confirm tolerances, support and surrounding finishes on the final drawing.
Power and water: confirm the ordered configuration
The source drawing specifies a reserved 220V outlet. Do not assume this applies to every destination or ordered unit, and do not infer supply voltage from plug shape. Confirm voltage, frequency, plug and electrical requirements for your exact order with the installer before connecting power.
Discuss whether your configuration uses manual filling or a planned water connection. Confirm water quality, connection, drainage and access requirements in the model instructions; do not add a permanent connection without the approved arrangement.
Ventilation, support and service access
- Keep the supporting surface level and follow the drawing's requirements for surrounding materials.
- The source drawing calls for non-combustible internal surrounding materials and bottom ventilation of approximately 0.02 m². Have the required opening arrangement confirmed for your project.
- Keep the bottom air inlet and required ventilation clear of finishes, stored items and debris.
- Provide access to the controls, water system and serviceable parts. Do not permanently seal the fireplace into the surround.
Installing below a television
A decorative flame does not establish that every TV-wall layout is suitable. Coordinate the fireplace instructions, television requirements, moisture management, ventilation, cables and access before approving the design. No universal TV clearance is specified here.
Read the TV-wall planning guide.
Before construction begins
- Choose the model, length, viewing arrangement and project location.
- Send room photos or drawings and identify the desired finished opening.
- Confirm the electrical and water configuration, ventilation, support and service access.
- Have your installer review the final drawing before cutting, enclosing or connecting the unit.
Request installation guidance for your project or view the linear fireplace.